Assignments WS 2015/2016

From Simulace.info
Revision as of 02:33, 13 December 2015 by Tomáš (talk | contribs) (Assignments)
Jump to: navigation, search


Assignments

Oleg.Svatos (talk) 15:35, 29 November 2015 (CET) Just to warn you in advance - topics like roulette, lottery and other simulations based purely on uniform randomnes will not be accepted as Monte Carlo simulation.

--Dinara (talk) 03:32, 11 December 2015 (CET)

Elevator system simulation

Goal: find the best balance between number of elevators and employees in the building (for instance 10 floor business center), so that the waiting time will be minimum Environment: NetLogo

Ok, first, I would really prefer if you created a new article for your assignment. This is confusing a bit.
Nevertheless, your assignment is too short to be evaluated. It must be elaborated in much much greater detail. Anyway, it seems that such a simulation would be better for discrete event simulation. Tomáš (talk) 02:33, 13 December 2015 (CET)


xpokl18

Heating system simulation

THIS IS JUST A DRAFT

Most households in the Czech Republic have mains gas central heating. This is a so-called ‘wet system’, which means a gas-fired boiler heats water to provide central heating through radiators and hot water through the taps in your home.

Some houses that aren’t connected to the gas network can use electrical heating or liquid petroleum gas (LPG) or heating oil, which work in a similar way to gas central heating, although LPG and oil are delivered by road and stored in a tank, which you may have to buy or rent from your supplier.

Gas is a highly efficient fuel, so you get a good return on every unit of energy. Modern condensing boilers, which use hot flue gases that are wasted in a standard boiler, have very high efficiency. Some are now 90% or more efficient.

I have recently acquired condensing boiler. Manufacturers claim that up to 98% thermal efficiency can be achieved, compared to 70%-80% with conventional designs (based on the higher heating value of fuels).

The control of the domestic condensing boiler is crucial to ensuring that it operates in the most economic and fuel efficient way.

Almost all have modulating burners. The burners are usually controlled by an embedded system with built-in logic to control the output of the burner to match the load and give best performance.

There are also many possible adjustements based on scheduling. I live in a flat with 5 more people. Problem is that some of them prefer ...

I will use simprocess.

Martin Knapovský, knam00@vse.cz